Snapper SPA521 - Page 37

36" MOWER DECK ASSEMBLY (Adjustable Height)
Footnotes:
TP 400-5023-4-CW-N
Manual No. 7006928PRO HYDRO
SERIES 1 & 2
37
Part No Descri
p
tionItem Qt
y
Note
1 7012709 1 RING, 1” External Retaining
2 7013010 1 DECAL, Warning (CPSC Cut Finger)
3 7021128 6 SPACER
4 7021960 2 SPACER, Powdered Metal
5 7091528 9 WASHER, 3/8” I.D. x 7/8” O.D. x 1/16” Flat
6 7073647 1 DECAL, Danger Guard/Catcher
7 7046626 4 BUSHING, Caster
8 7023735 3 KNOB, Hood (5/16-18 thread)
9 7023747 2 BUSHING, 1”
10 7024156 1 DECAL, Caution- Operator Instruction
11 7027950 1 SPRING, Chute
12 7035710 1 V-BELT, 36” Deck Drive (Nom. Effective Length: 84.80”)
13 7029258 16 BUSHING, Suspension
14 7029259 2 STUD, Lift, 1/2-13 Thread, Both Ends
15 7046214 2 LIFT WASHER (Weldment)
16 7029263 8 SLEEVE, Suspension
17 7029277 1 HINGE PIN, Chute
18 7029278 1 SPRING, Idler
19 7029295 2 DECAL, Height of Cut
20 7076940 3 SCREW, 5/16-18 x 4-1/2” Hex Head Cap, GR 5
21 7029355 8 BOLT, 1/2-13 x 3-3/4” Hex Head, GR 5
22 7091587 8 WASHER, 1/2” Flat
23 7046580 1 DECAL, SNAPPER Pro w/Trademark
24 7090613 2 NUT, 3/8-16 Hex Flange Lock
25 7058871 1 DEFLECTOR, 36” ANSI Compliant (Weldment)
26 7034964 4 ARM, Suspension, 12” Long
27 7034980 1 COVER, 36”
28 7035279 2 BRACKET, Height-of-Cut
29 7041295 1 PIVOT, Idler Arm (Weldment)
30 7042473 1 FRAME, 36” Adjustable (Weldment)
31 7035756 2 PLATE, Ballasat
32 7054012 2 ASSEMBLY, Crank (Includes Crank, 7042477,
Handle 7029380 & Roll Pin
7013877)
33 7054018 1 ASSEMBLY, Idler Arm, 36” see 36” Deck Idler Assembly
page
34 7044664 1 WELDMENT, Deck, Adjustable Height (Red)
35 7076998 2 LUBE FITTING, 1/4-28 Straight
36 7091601 3 NUT, 5/16-18 Hex Flange Lock, GR 5
37 7091819 2 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap