EasyManua.ls Logo

Snapper SPLH152KW, SPLH172KW, SPA361, SPA481, SPA521, SPA611 User Manual

Snapper SPLH152KW, SPLH172KW, SPA361, SPA481, SPA521, SPA611
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Safety Instructions & Operator’s Manual for
PRO HYDRO
WALK BEHIND MOWERS
MID-SIZE
SERIES 2
POWER UNIT
MODELS
MOWER UNIT
MODELS
SPLH152KW
SPLH172KW
SPA361
SPA481
SPA521
SPA611
MODEL NUMBER EXPLANATION
S P L H 15 2 KW
MODEL DESIGNATION ENGINE TYPE
MODEL TYPE SERIES DESIGNATION
MODEL OPTION ENGINE HP
DRIVE SYSTEM TYPE
S – Snapper Commercial Model ENGINE HORSE POWER CUTTING DECK WIDTH 2 - Series Designation KW – Kawasaki Engine
P – Pro Mid Size Model 15 – 15.0 Engine HP 36 – 36” Cutting Deck
L - Loop Type Handle Model 17 – 17.0 Engine HP 48 – 48” Cutting Deck
H – Hydro Drive System 52 – 52” Cutting Deck
A – Adjustable Cutting Deck 61 – 61” Cutting Deck
Thank you for buying a SNAPPER Product! Before operating your PRO WALK BEHIND, read this manual
carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember
that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful
use in accordance with the operating instructions and common sense!
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
MANUAL No. 7-5535 (I.R. 3/18/03)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Snapper SPLH152KW, SPLH172KW, SPA361, SPA481, SPA521, SPA611 and is the answer not in the manual?

Snapper SPLH152KW, SPLH172KW, SPA361, SPA481, SPA521, SPA611 Specifications

General IconGeneral
BrandSnapper
ModelSPLH152KW, SPLH172KW, SPA361, SPA481, SPA521, SPA611
CategoryLawn Mower
LanguageEnglish

Summary

Safety Instructions

Protection for Children

Guidelines for keeping children safe during operation.

Slope Operation Safety

Precautions for operating the mower on slopes.

Gasoline Handling Safety

Safe procedures for handling gasoline to prevent fire or injury.

Maintenance Safety Precautions

Safety measures to follow during machine maintenance.

Section 1 - Familiarization

Introduction to the Mower

Overview of the manual's purpose and the mower.

Mower Nomenclature and Components

Identification of key parts and controls of the mower.

Section 2 - Safety Messages and Symbols

Operation and Stopping Procedures

Step-by-step instructions for operating and stopping the mower.

Understanding Operator Safety Warnings

Explanation of general warnings and operational safety.

Hazard and Caution Labels

Identification and meaning of specific danger and caution labels.

Section 2 - Controls

Engine Controls Overview

Description of engine speed and starting controls.

Blade and Traction Controls

Explanation of blade clutch and traction lever functions.

Section 3 - Operating Instructions

Pre-Start Checklist and Fluid Levels

Essential checks before starting the mower, including oil.

Before Operating and Safety Checks

Procedures for verifying safety interlocks and readiness.

Safe Handling of Fuel

Guidelines for safely refueling the mower.

Mower Operation Procedures

Stopping the Mower Safely

Correct methods for stopping the engine and blades.

Starting and Operating the Engine

Steps for starting the engine and initial operation.

Traction and Mower Control

Traction Speed Control and Forward/Reverse

How to control the mower's forward and reverse speed.

Mower Operation and Turning

Instructions for operating the mower and making turns.

Hillsides and Handle Adjustment

Mowing and Turning on Hillsides

Techniques for safely mowing and maneuvering on slopes.

Handle Height Adjustment

How to adjust the handlebar height for operator comfort.

Cutting Height Adjustments

Cutting Height Adjustment (Fixed Decks)

Methods for adjusting the cutting height on fixed decks.

Adjusting Caster Wheels

Procedure for adjusting caster wheels to set cutting height.

Adjusting Blade on Cutter Spindle

How to adjust blade position for cutting height changes.

Deck Attachment Adjustments

Adjusting Fixed Deck Attachment

Steps for attaching and leveling the mower deck.

Adjustable Deck Height Adjustments

How to adjust cutting height on adjustable deck attachments.

Section 4 - Engine Troubleshooting

Engine Starting Issues

Common problems and solutions for engine not starting.

Engine Power and Performance Issues

Troubleshooting for hard starting, loss of power, or rough running.

Mower Vibrations and Stalling

Solutions for excessive vibration or engine stalling.

Section 4 - Service and Lubrication Information

Component Service and Lubrication Overview

Diagram showing lubrication points and service intervals.

Section 4 - Maintenance Schedule and Parts

Maintenance Schedule by Operating Hours

Recommended maintenance tasks based on hours of use.

Grease Zerk Locations

Specific locations for greasing various mower components.

Maintenance and Replacement Parts

List of common replacement parts and their part numbers.

Section 4 - Hydraulic System Service

Electric Clutch Adjustment

Procedure for adjusting the electric blade clutch air gap.

General Hydraulic System Servicing

Guidelines for changing hydraulic oil and filter.

Pump/Motor Replacement

Recommendations for replacing hydraulic pumps or motors.

Hydraulic Pump Belt Removal

Steps for removing the hydraulic pump drive belt.

Section 4 - Machine Controls and Belts

Hydraulic Pump Belt Installation

Procedure for installing the hydraulic pump drive belt.

Replacement Parts Information

Guidance on obtaining genuine Snapper replacement parts.

Machine Speed Control Ranges

How to change the machine's speed range settings.

Section 4 - Traction Control Neutral Adjustment

Traction Control Neutral Adjustment Procedure

Detailed steps for adjusting the neutral position of traction controls.

Section 5 - Mower Attachment Service

Cutter Deck Belt Service

Instructions for removing and installing cutter deck belts.

Spindle to Spindle Deck Belt Service

Procedures for servicing belts between mower spindles.

Section 5 - Cutting Blade Service

Cutting Blade Service and Replacement

Guidelines for inspecting, sharpening, and replacing mower blades.

Section 5 - Spindle Service

Mower Spindles Bearing Replacement

Steps for replacing bearings in field serviceable mower spindles.

Section 6 - Battery Service and Testing

Battery Removal and Installation

Procedures for safely removing and installing the battery.

Battery Service and Charging

Instructions for servicing and charging the battery.

Battery Testing Procedures

Methods for testing the battery's condition using voltmeter or hydrometer.

Section 6 - New Battery Preparation

New Battery Preparation and Charging

Steps for preparing a new battery before installation.

Snapper Limited Warranty Information

2-Year Limited Warranty Details

Information on warranty coverage, exclusions, and disclaimers.

Snapper Product Registration

Product Registration Form and Instructions

How to register your Snapper product for warranty.

Primary Maintenance Overview

Importance of Maintenance Against Dirt

Explains how dirt affects engine performance and longevity.

Primary Maintenance - Engine Care

Engine Oil and Air Cleaner Servicing

Guidance on servicing 4-cycle and 2-cycle engine oil and air cleaners.

Starting Check List

A comprehensive list of checks before starting the engine.

Important Product Warnings

Battery Terminal and Chemical Warnings

Warnings related to battery components and lead compounds.

Engine Exhaust and Component Warnings

Warnings about chemicals in engine exhaust and vehicle components.

Related product manuals