Snapper SPA521 - Page 47

48", 52" & 61" MOWER DECK ASSY (Adj. Height) Pt.2
Footnotes:
TP 400-5023-4-CW-N
Manual No. 7006928PRO HYDRO
SERIES 1 & 2
47
Part No Descri
p
tionItem Qt
y
Note
1 7054035 1 WELDMENT, 48” Deck Frame
1 7041812 1 WELDMENT, 52” Deck Frame
1 7043865 1 WELDMENT, 61” Deck Frame
2 7021960 2 SPACER, Powdered Metal
3 7076998 2 FITTING, 1/4-28 Straight Lube
4 7046214 2 LIFT WASHER (Weldment)
5 7029260 1 WASHER, Lift 2 are used on 61” Decks
6 7054012 2 ASSEMBLY, Crank (Includes Crank, 7042477,
Handle 7029380 & Roll Pin
7013877)
7 7035285 1 COVER, 48” Right
7 7046607 1 COVER, 52” Right
7 7035314 1 COVER, 61” Right
8 7035286 1 COVER, 48” Left
8 7046606 1 COVER, 52” Left
8 7035313 1 COVER, 61” Left
9 7035287 1 COVER, 48” Center
9 7035303 1 COVER, 52” Center
9 7035315 1 COVER, 61” Center
10 7023735 4 KNOB, Hood (5/16-18 thread)
11 7024085 2 WING NUT, 5/16-18
12 7046626 4 BUSHING
13 7044667 1 SHIELD, Muffler (SPA610, SPA611)
14 7091318 2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
15 7091298 2 NUT, 5/16-18 Hex Nyloc
16 7046580 1 DECAL, SNAPPER Pro w/Trademark
17 7029295 2 DECAL, Height of Cut
18 7043815 1 DECAL, Caution Handle May Be Hot (Adjustable Decks only)
19 7043816 1 DECAL, Oil Threads Here (Adjustable Decks only)
20 7400156 1 WELDMENT, Pro Knob used on 48” Deck only
21 7029259 2 STUD, Lift, 1/2-13 Thread, Both Ends
22 7029355 8 BOLT, 1/2-13 x 3-3/4” Hex Head, GR 5
23 7034964 2 ARM, Suspension, 12” Long 48” & 52” Decks
23 7034979 4 ARM, Suspension, 13-1/2” Long 61” Deck
24 7029258 16 BUSHING, Suspension
25 7029258 16 BUSHING, Suspension
26 7091587 12 WASHER, 1/2” Flat
27 7091325 8 NUT, 1/2-13 Hex Nyloc