24
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and may
be damaged by their use. Use clean cloths to remove dirt, dust, lubricant,
grease, etc.
Always store the machine clean and in a dry enclosure with the battery
charged.
MAINTENANCE
Maintenance task Each
time the
machine
is used
Every
two
hours
Each
week
After use Every
year or
when
required
Visual check of the
tool's safety systems
(distancing device,
carrying eye, safety
casing)
XX
Check the trigger
safety system functions
X
Visual check of the
tool (no cracks or
deformation)
XX X
Visual check of the tool
at the shaft attachment
(no deformations or
wear)
XX X
Check the battery level X
Inspection of the
tool by an approved
Snapper dealer
X