26
TROUBLESHOOTING
Problem Cause Solution
String
trimmer
fails to start
when trigger
lock button is
depressed.
1. The battery pack
is not attached to the
trimmer.
1. Attach the battery pack to the
trimmer.
2. No electrical contact
between the trimmer and
battery.
2. Remove battery check contact
and reinstall the battery pack.
3. The battery pack is
depleted.
3. Charge the battery pack.
4. The lock-out
button and trigger
are not depressed
simultaneously.
4. Press down the lock-out button
and hold it
,
then depress the trigger
to turn on the string trimmer.
String
trimmer stops
while cutting.
1. The guard is not
mounted on the trimmer
,
resulting in an overly
long trimmer line and
motor overload.
1. Remove the battery pack and
mount the guard on the trimmer.
2. Heavy cutting line is
used
.
2. Use only with nylon cutting line
0.080" diameter or less.
3. The motor shaft or
trimmer head is bound
with grass.
3. Stop the trimmer
,
remove the
battery
,
and remove the grass from
the motor shaft and trimmer head.
4. The motor is
overloaded.
4. Remove the trimmer head from
the grass.the motor will recover to
work as soon as the load is removed.
When cutting
,
move the trimmer
head in and out of the grass to be cut
and remove no more than 8 inches
of length in a single cut.
5. The battery pack or
string trimmer is too hot.
5. Allow the battery pack or trimmer
to cool until the temperature drops to
the normal temperature.
6. The battery pack is
disconnected from the
tool
.
6. Re-install the battery pack.
7. The battery pack is
depleted.
7. Charge the battery pack.
To Next Page
Loading...
Need help?
General
