Snapper SZ2042

ENGINE
Manufacturer Briggs & Stratton
Type 40N877-0061-G1
Power
20 HP
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 3-1/2 gallons 13,25 litres
Cooling Air cooled
Air lter Standard
Alternator 16 amp
Starter Electric
TRANSMISSION
Transmission Hydro Gear
Steering control Dual levers, foam gripped
Speed forward 0-6.5 mph 0-10,5 km/h
Speed reverse 0-3.5 mph 0-5,6 km/h
Brakes Mechanical Park Brake
Front caster tires 11 x 4-5
Rear tires, turf pneumatic 18 x 8.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 42" 107 cm
Cutting Height 1-1/2 - 4" 3,8 cm - 10,2 cm
Number of Blades 2
Blade Length 21" 53,3 cm
Anti-scalp Rollers 3 Adjustable
Sprung Seat Standard
Hinged Arm Rests Optional
Service Meter N/A
Blade Engagement Ogura Clutch
Deck Construction Stamped
Productivity 2.4 acres/h
9,712 m
2
/h
DIMENSIONS
Weight
580 lbs 263 kg
Base Machine Length 75" 191,5 cm
Base Machine Height
40" 101,6 cm
Base Machine Width 41-1/2" 105,5 cm
Overall Width, Chute Up
44" 112 cm
Overall Width, Chute Down
50" 127 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
31
TECHNICAL DATA