Snapper ZF2200K

Section 2 - OPERATING INSTRUCTIONS
2.4.6. WHEEL DRIVE
1. With engine running, adjust engine
speed control to Rabbit or “Fast” position.
2. Release parking brake.
3. Move joystick lever carefully and slowly
into desired speed position. A small
movement of the joystick can cause the
power unit to move instantly. Move joystick
carefully and slowly.
4. During mower motion, the joystick may
be placed in any desired position to speed
up or slow down forward or rearward motion.
See Figure 2.10.
NEUTRAL
1 POSIT ION I
FIGURE 2.10
CAUTION
Never park the SNAPPER Out Front Z-Rider on an
incline or embankment.