Snapper ZM2501KH - Fuel Tank Assembly

7
FUEL TANK ASSEMBLY
ITEM PART NO. DESCRIPTION
1 2-8903 CAP, 3-1/2” Fuel (2)
2A 5-4430 FUEL TANK, Main (Includes Item 1 - Fuel Cap)
2B 5-7705 FUEL TANK, Main (Includes Item 1 - Fuel Cap)
(MZM2200KH Models Only) (Includes Fuel Gauge)
3 2-6746 TRIM, 2 Inch (3)
4 9-1508 BOLT, 5/16-18 x 3/4” Short Neck Carriage Grade 5 (2)
5 2-3295 U-NUT, 1/4-20 Locking (4)
6 9-1523 SCREW, 5/16-18 x 5/8” Hex Washer Self Tapping (2)
7 9-1298 NUT, 5/16-18 Hex Nylon Insert (2)
8 4-2886 BRACKET, Fuel Tank Support
9 5-4528 FUEL TANK, Auxiliary (Includes Item 1 - Fuel Cap)
10 4-4701 BRACKET, Mounting Auxiliary Fuel Tank
11 2-9900 CLAMP, 7/16” Hose (8)
(4 used on MZMs; 8 used on ZMT2500KH;
8 used on ZM2501KH)
12 3-2956 HOSE, 1/4” I.D. x 10” Fuel
13 4-4777 FILTER, 15 Micron Fuel (Included With Engine)
14 3-5853 HOSE, 1/4” I.D. x 4” Fuel (2)
15 4-4681 VALVE, 3-Way Fuel
16 4-4797 HOSE, 1/4” I.D. x 45” Fuel
-- 4-5333 HOSE, 1/4” x 36” Fuel (MZM Models Only)
17 7-7345 PAD, Foam (3)
18 5-4529 ASSEMBLY, Fuel Pick-up (Main) (11.75” Long)
19 5-4530 ASSEMBLY, Fuel Pick-up (Auxiliary) (5.25” Long)
20 4-7038 FUEL GAUGE, Kelch
21 4-7112 GROMMET, Fuel Tank Gauge
NOTE: Items 9, 10, 12 & 15 are not used with Model MZM2200KH.
MID MOUNT Z-RIDER MANUAL No. 06110