EasyManua.ls Logo

Snapper ZM2501KH - User Manual

Snapper ZM2501KH
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safety Instructions & Operator’s Manual for
MID MOUNT Z-RIDER
ZERO TURNING
HYDRO DRIVE
SERIES 1
POWER UNIT MODELS
ZM2501KH
MOWER UNIT MODELS
ZM5200M ZM6100M
MODEL NUMBER EXPLANATION
Z M 25 01 KH
DRIVE SYSTEM TYPE ENGINE TYPE
MOWER ORIENTATION SERIES DESIGNATION
ENGINE HP
POWER UNIT
Z – Zero Turnin
g
– H
y
dro Drive 25 – En
g
ine Horse Power 01 – Series Desi
g
nation KH – Kohler En
g
ine
M – Mid Mount Mower
MOWER UNIT
Z – Zero Turnin
g
– H
y
dro Drive 52 – Mower Cuttin
g
Width 00 – Series Desi
g
nation M – Mower Deck
M – Mid Mount Mower 61 – Mower Cuttin
g
Width
Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
COPYRIGHT © 1999
SNAPPER INC.
ALL RIGHTS RESERVED
MANUAL No. 7-2902 (REV. 1, 8/20/99)

Other manuals for Snapper ZM2501KH

Questions and Answers

  • E
    Erin WuSep 13, 2025
    Why does the Snapper Lawn Mower engine backfire when turned to “STOP”?
    • E
      Emily PenaSep 13, 2025
      The Snapper Lawn Mower engine might backfire when turned to “STOP” because the throttle control is set too “FAST”. Set the throttle control to “SLOW” and allow the engine to idle. Then, turn the key to “OFF.”

Snapper ZM2501KH Specifications

General IconGeneral
Deck MaterialSteel
Cutting Height1.25 - 3.75 inches
Fuel TypeGasoline
Starter TypeRecoil
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
Engine TypeBriggs & Stratton

Related product manuals