Sno-Way PROCONTROL 99100993 - Introduction

3
This manual was written for the assembly, installation and
maintenance of your new Sno-Way ProControl
TM
Operating System. Most importantly, this manual provides
an operating plan for safe use. Refer to the Table of
Contents for an outline of this manual.
Please keep this manual with your machine at all times as
reference material and so it can be passed on to the next
owner if the machine is sold.
We require that you read and understand the contents of
this manual COMPLETELY, especially the chapter on
SAFETY, before attempting any procedure contained in
this manual.
The Society of Automotive Engineers has adopted
this SAFETY ALERT SYMBOL to pinpoint character-
istics that, if NOT carefully followed, can create a
safety hazard. When you see this symbol in this man-
ual or on the machine itself, BE ALERT!, your per-
sonal safety and the safety of others, is involved.
• Defined below are the SAFETY ALERT messages
and how they will appear in this manual.
NOTE: Additional information concerning the equipment
or the procedure that may or may not be contained else-
where in this manual.
NOTE: The wireless ProControl has a rechargable bat-
tery that may have little to no charge when unpackaged.
Upon installation, the battery must be fully charged
before the ProControl will be able to be paired to the
receiver on the plow. It may take 3 to 4 hours to charge
the battery in the controller. The LCD screen will display
"CHARGED" when the battery is fully charged. The Pro-
Control battery will not charge if the temperature is below
0° C (32° F).
BE AWARE! It is illegal to remove, deface or other-
wise alter the safety decals mounted on this equip-
ment.
Record the ProControl
TM
transmitter and Receiver Serial
Numbers. This is information that your Dealer needs to
answer questions or to order replacement parts, if
needed, for your unit.
We reserve the right to make changes or improve the
design or construction of any part(s) without incurring the
obligation to install such parts or make any changes on
any unit previously delivered.
c
WARNING
FAILURE TO FOLLOW CAN RESULT IN INJURY
OR DEATH.
c
CAUTION
Information, that if not carefully followed, can
cause injury or damage to equipment!
DEALER
NAME
PHONE ( ) –
ADDRESS
CITY STATE ZIP
(FILL IN)
ORIGINAL PURCHASER
NAME
PHONE ( ) –
ADDRESS
CITY STATE ZIP
(FILL IN)
NAME PLATE DATA
(FILL IN)
PROCONTROL
TM
SERIAL NUMBERS:
TRANSMITTER S.N.
RECEIVER S.N.
Snow-Way Products are built under one or more of the
following patents:
5,524,368
6,691,435
6,860,039
5,832,637
6,701,646
6,860,040
5,894,688
6,702,208
2,121,948 5,987,785
6,775,933
6,154,986
6,778,932
7,137,724
7,171,769
7,146,754
7,171,770
7,640,682
INTRODUCTION