Snom 300 Quick Setup Guide

Name: Snom 300
Brand: Snom
Rating: 4 (1 reviews)

2 pages

To Next Page



QUICKSETUPGUIDE

SNOM3XXSERIES



AllitrinityIPVoicephonesarepre‐configured,noprogrammi ngorconfiguringisrequiredonsite.



USINGTHEPHONE

• Enterthephonenumberonthealphanumerickeypadandpickupthehandsetor

• Pickupthehandset,enterthenumberandpressthe‘tick’buttontostartdialling



NEEDHELP?

Ifyouhavefollowedalltheabovestepscorrectlyandthereisnostrongdialtoneor

3lightsplease

contactusforfurtherassistance:

• Phone1300ITRINITY(1300487464)ordial999freefromaworkingitrinityhandset.

Tobetterassistuspleasehaveyouritrinityaccountnumberoritrinityphonenumberandthe

makeandmodelofourmodem/router.



Seeourknowledgebaseat

http://itrinity.helpserve.comoremailusathelpdesk@itrinity.com.au



TEP1

Connectoneendofyourethernetcabletoyour

modem/routerLANportandtheotherendto

the‘net’portofyoursnomphone.

STEP2

Takethepoweradaptorfromthepackage.

ConnectoneendtoyoursnomintheDCoutlet

andtheotherendinto

thepoweroutlet.



Thebackofyourphoneshouldlooklikethis:



STEP3

Onceyouhaveallrelevantcablespluggedinto

yoursnomphoneitwillautomaticallystartto

bootup.Makesurethepoweristurnedonat

theoutlet.

Itmaytakeupto5minutesforyourphone

to

bootupandconnecttotheitrinitynetwork.

Yournameanddetailsshoulddisplayonthe

screenandyoushouldbeabletomakecalls.

Other manuals for Snom 300

User Manual105 pages

Quick Start Guide25 pages

Quick User Guide2 pages

Quick Reference Guide5 pages

Specifications2 pages

Important Notes2 pages

Quick Installation24 pages

Manual17 pages

Instructions4 pages

Quick Reference2 pages

Questions and Answers:

T
Troy ShawJul 26, 2025
What to do if my Snom Telephone has no ringer sound?
- N
  Nicole CookJul 26, 2025
  If your Snom Telephone has no ringer sound, several factors could be the cause. First, ensure that the Ethernet cable and AC adapter are properly connected. Second, check the volume settings using the volume button. Third, if you have altered any settings on the display, revert them to their original configuration. As a final step, try disconnecting and rebooting the device by disconnecting the Ethernet cable.

Snom 300 Specifications

General

Management platform	HTTP/HTTPS
Keypad number of keys	27
Backlight color	Green
Backlight display	Yes
Product type	IP Phone
Product color	Black
Voice codecs	G.711, G.722, G.723.1, G.726, G.729A
Lines quantity	4 lines
Phonebook capacity	100 entries
Number of VoIP accounts	-
Security algorithms	HTTPS, SRTP, SSL/TLS
Supported network protocols	UDP, TCP, TLS
Ethernet LAN (RJ-45) ports	2
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Safety	IEC 60950-1:2001
Certification	FCC Class B, CE