Snom 715 - Changing the Settings on the Phone and Turning on Call Forwarding; Turning on Forwarding of All Calls with a Programmed Function Key

54
snom 715 User Manual Using the Phone
Changing the settings on the phone and turning on call forwarding
Forward all Forward when busy Forward after timeout
Press
Settin
Settin Settin
Press
2
ABC
2 Call Features
2
ABC
2 Call Features
2
ABC
2 Call Features
Press
1
1 Call Forwarding
1
1 Call Forwarding
1
1 Call Forwarding
Press
1
1 Forward All
2
ABC
2 When Busy
3
DEF
3 On Timeout
Press
2
ABC
2 Target
2
ABC
2 Target
2
ABC
2 Target
Type phone number phone number phone number
Press
Press - -
3
DEF
3 Time
Type - - number of seconds
Press - -
Press
1
1 Activate
1
1 Activate
1
1 Activate
The setting will change to "1
Activate", indicating that call forwarding is now active. Press for
two seconds to return to the idle screen:
The symbol indicates that forwarding of all calls is activated. If there is no other status message
with a higher priority, the status line shows the extension, telephone, mailbox, or cell phone number that
all incoming calls are being forwarded to. If there is a status message with a higher priority, you can
find the destination of the forwarded calls in the status infos via the Settings menu > 6 Information >
1 Status info. For more information on status messages see "Appendix 2 - Status messages" on page
82.
Forwarding when busy and On timeout are indicated in the status bar which can display only
one message at a time. When both are active at the same time, only "Forward when busy" will be
displayed. If there are other status messages with a higher priority than "Forward when Busy" (e.g.,
firmware update available, reboot required, waiting for call completion, etc.), they will take precedence
over the call forwarding indication.
When "Forward when Busy" and/or "On timeout" are turned on, the
Info
function key is available in
the function key line. Press the key to show the "Status info" screen with all current status messages,
including call forwarding.
Turning on forwarding of all calls with a programmed function key
If the function key
CFwd
is not available when the display is in idle mode, you can make it available
on the Function Keys page of the phone's web interface. For further information see "Example 4,
Programming a context-sensitive function key" on page 61.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46