Snooper Syrius Pro - Qwerty Keyboard

60 • EN
Return to contents
5.12 Map Colour
This function allows you to choose between the alternative colour schemes that are available for the maps used in Snooper system
(several of which are most suitable for use at night). To access this facility:
 Press the centre of the screen to enter the ‘Navigate to’ menu.
 Press the ‘Configure’ button.
 Press the black arrow once.
 Press the ‘Change map colour’ icon.
Use the arrows to the left and right hand side of the map display to cycle through the different colour schemes. There are nine colour
schemes to choose from.
To save the changes press the ‘OK’ button at the bottom of the display.
If you wish to keep the settings unchanged, you can exit the ‘Change map colour’ menu by pressing the return arrow
located in the bottom right hand corner of the display.
5.13 Qwerty Keyboard
This function allows you to switch between a ‘Qwerty’ keyboard which is the keyboard selected as the factory default setting or a
keyboard arranged in alphabetical order.
 Press the centre of the screen to enter the ‘Navigate to’ menu.
 Press the ‘Configure’ button.
 Press the black arrow once.
 Press the ‘Qwerty keyboard’ icon.
 Select ‘Ye s’ or ‘No’ depending on the keyboard preferred.
To save the changes press the ‘OK’ button at the bottom of the display.
If you wish to keep the settings unchanged, you can exit the ‘Qwerty keyboard’ menu by pressing the return arrow located
in the bottom right hand corner of the display.