Standby & Wake up
STANDBY
OFF MODE
WAKE UP
Collapse the tilt-axis to the
grip, the gimbal will enter
standby mode, and all the
motors will stop working.
Working with Snoppa App:
collapse the tilt-axis to the
grip, exit Snoppa app, the
gimbal will power off
automatically after 20
seconds without any
operation.
Working without Snoppa
App: Press & hold for 2
seconds, the gimal turns off
immediatly.
Within 30 minutes without
any operation, the Bluetooth
will enter sleep mode, and
the stabilizer will not be
found in the Bluetooth
device list.
Press the indicator button to
wake up the Bluetooth of
stabilizer, the indicator will
flash green, and the device
will show up in the device list
and can be connected.
60
o
TILT
Rotate the tilt-axis down
until the intersection angle
is larger than 60 degree,
motor stabilization will be
reactivated.
BLUETOOTH
SLEEP & WAKEUP
To Next Page
Loading...
