Snow Devil 57030 - Using the Snow Thrower

#57030OPERATOR’SMANUAL 11
Using Your Snow Thrower (Fig. 11)
1. OnceyourSnowThrowerhasbeenrunningoutside
forseveralminutes,itisnowreadyforuse.Make
surethepathinfrontofyourSnowThrowerisfree
frompeople,animals,objects,andallotherob-
structionsexceptforsnow.
2. Adjustthechuteoutlettothedesireddirection.Turn
thechuterotationhandleclockwiseorcounter-
clockwiseuntilthedesiredpositionisreached(see
page12).
WARNING: Neverdirectthechuteoutlet
towardpeopleoranimals.Whilesnowmayseem
harmless,itcancontainrocksorotherdebristhat
cancauseseriousinjurywhenprojectedthroughthechute.
3. Movethedrivespeedcontrollevertothedesiredspeed.Therearesix(6)settings:four(4)
forwardspeedsandtwo(2)reversespeeds.1istheslowestforwardspeedand4isthefastest
forwardspeed.R1istheslowestreversespeedandR2isthefastestreversespeed(Fig.11).
Note:Thereisnoneutraldrivesettingsincethedrivecontrolhandlemustbeengagedformovement.
Driving and Auger Controls (Fig. 12-13)
1. Pressdownontheaugercontrolhandleonthe
left-handside(Fig.12).Theaugershould
startspinning.
2. Pressdownonthedrivecontrolhandleontheright-
handside(Fig.13).Themachineshouldstartmoving
inthedirectionwiththespeedsetbythedrivespeed
controllever.
3. Whennishedclearingasnowpath,releasethe
augercontrolhandleandthedrivecontrolhandle.
4. Thedrivespeedcanbeadjustedbyusingthedrive
speedcontrolhandle.Besuretoreleaseboththeauger
controlhandleandthedrivecontrolhandlebeforead-
justingthedrivespeedcontrollever.
Note: NEVER CHANGE THE SPEED WHILE YOUR
SNOW THROWER IS MOVING. IT COULD DAM-
AGE THE DRIVE MECHANISM AND VOID THE
WARRANTY.
Toadjustthechuteoutletdirection,besuretoreleaseboththe
augercontrolhandleandthedrivecontrolhandlebeforedoingso.
Fig.12
Fig.13
Fig.11