SNOWJOE iON100V-24SB - User Manual

© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC Model iON100V-24SB Form No. SJ-iON100V-24SB-880E-M
OPERATOR’S MANUAL
CORDLESS SNOW BLOWER
100V MAX* | 5.0 Ah EACH | 24-INCH | SELF-PROPELLED | 2-STAGE
R
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions when using cordless snow blowers.
Basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury.
General Safety Rules
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given
along with the particular operating instruction. This
means that the operation requires special ATTENTION,
CAUTION, and AWARENESS.
• Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
• Use the right product – Do not use this machine for any
job except that for which it is intended.
• mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
• Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the snow blower when you are tired
or under the inuence of alcohol or drugs.
• Store indoors – When not in use, the snow blower should
be kept dry and stored out of the reach of children in a high
or locked place.
• Maintain snow blower with care – Follow instructions for
lubricating and changing accessories.
mWARNING! Always disengage both triggers, and
disconnect the battery packs; wait for all movement to
stop before making any adjustments, inspecting, servicing,
changing accessories, cleaning the snow blower, or when
any other dangerous conditions present. Any such operation
should be performed after revolving parts inside the snow
blower stop completely. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
mWARNING! When replacing any parts, you must strictly
observe the instructions and procedures described in this user
manual. Special care should be paid to any rubber parts, since
these parts may increase the engine load and decrease its
mechanical power if damaged.
mWARNING! If you notice that the snow blower is not
running properly or hear abnormal sounds from the engine
when it is in use, immediately stop the machine, disconnect the
battery packs, and contact Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
• Moving parts present risks – Keep your face, hair,
clothing, hands, and feet away from moving parts. All
guards and safety attachments must be installed properly
before using the unit. Shut o and disconnect the battery
packs before touching any parts other than the handles
and switch.
Electric Safety
mWARNING! Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
1. Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
2. Use appliances only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
3. When the battery packs are not in use, keep them away
from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make
a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a re.
4. Under abusive conditions, liquid may be ejected from the
batteries; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
5. Do not use a battery pack or appliance that is damaged
or modied. Damaged or modied batteries may exhibit
unpredictable behavior resulting in re, explosion or risk of
injury.

Summary

IMPORTANT! Safety Instructions

General Safety Rules

Basic precautions for safe operation, clean work area, proper attire, staying alert.

Electric Safety

Warnings and instructions regarding electrical shock, fire, and injury.

Snow Blower General Safety

Safe Operation Practices

Keep area clear, dress properly, stay alert, and maintain the machine.

Walk-behind Snow Blower Specifics

Operator Training Requirements

Read manual, understand controls, know how to stop quickly.

Pre-Operation Preparation

Inspect area, remove foreign objects, wear winter garments, safety glasses.

Battery and Charger Safety

Charging Environment Safety

Avoid dangerous environments and ensure proper ventilation during charging.

Charger and Cord Care

Protect charger cord from damage and use with a proper electrical outlet.

Battery Handling Hazards

Preventing Battery Damage

Do not use damaged/modified batteries; avoid mixing, shorting, crushing, or disassembly.

Battery Integrity Warnings

Use only original batteries; avoid mixing types or brands.

Charger and Charging Process

Environmental Protection for Charger

Protect charger from moisture, vapors, flammable liquids, and extreme temperatures.

Safety Symbols Explained

Know Your Cordless Snow Blower

Technical Data and Unpacking

Unpacking and Initial Inspection

Verify carton contents and inspect for shipping damage.

Battery Pack Operation Basics

Equipment powered by two iON100V-5AMP batteries; they are maintenance-free.

Battery Charge Level Indicator

Use push button to check charge level from LEDs on the battery.

Battery Features and Ports

USB Charging Ports Functionality

Battery has USB ports for charging phones, tablets, and other devices.

Integrated LED Light Feature

Battery has a 0.35 watt LED light for illumination.

Charger Operation Guide

When to Charge Batteries

Batteries do not develop a 'memory'; charge as needed using indicator lights.

Charging the Battery Packs

Steps for removing batteries and placing them into the charger.

Charger Indicator Lights and Assembly

Charger Light Indicator Meanings

Table explaining charger light patterns and their possible causes/solutions.

Handle Assembly Instructions

Instructions for assembling the upper and lower handle sections.

Discharge Chute Assembly

Controls and Features Overview

Control Panel Functions Explained

Auger Speed and LED Controls

Adjusts auger rotation speed and controls LED lights.

Reverse and Drive Speed Controls

Activates reverse mode and controls forward marching speed.

Chute Direction and Deflector Adjustment

Adjusts chute direction and raises/lowers chute deflector.

Auger Trigger Operation

Drive Trigger Operation

Chute Clean-Out Tool Usage

Skid Shoes Adjustment Guide

Pre-Start Checklist

Battery and Trigger Checks

Ensure batteries are charged and triggers function correctly.

Starting the Snow Blower

Stopping the Snow Blower

Reverse Traveling Operation

Operating Tips and Maintenance

General Maintenance Procedures

Tips for checking bolts, cleaning after use, and preventing freezing.

Battery and Charger Care

Warnings about cleaning, not immersing, and avoiding harmful solvents.

Tire Pressure and Skid Shoes

Check and Adjust Tire Pressure

Check and maintain tire pressure; avoid over-inflation.

Replacing Skid Shoes

Instructions for replacing worn skid shoes.

Replacing Scraper Blade

Replacing Shear Bolts

Replacing Auger Blades

Replacing the Impeller

Lubrication Procedures

Auger Shaft Lubrication

Lubricate auger shafts and bearings annually.

Auger Gearcase Lubrication

Gearcase filled at factory; check/fill every 150-200 hours.

Storage and Battery Care

Off-Season Storage Guidelines

Guidelines for storing batteries and chargers during off-season.

Battery Disposal and Safety

Safety precautions for battery disposal, avoiding fire and explosion.

Service and Support Information

Model and Serial Number Recording

Location to record model and serial numbers for service.

Federal Communications Commission (FCC)

FCC Compliance and Interference

Compliance information regarding radio frequency energy and interference.

Optional Accessories List

Snow Joe + Sun Joe Customer Promise

Limited Product Warranty

Two-year limited warranty for new products against defects in material or workmanship.

Product Registration Benefits

Encourages product registration online or via mail/phone for better service.

Warranty Coverage and Exclusions

Warranty for original purchaser; excludes commercial use, unauthorized sellers, wear parts.

SNOWJOE iON100V-24SB Specifications

General

Battery Voltage	24V
Run Time	Up to 40 minutes
Throw Distance (Max)	20 feet
Battery Type	Lithium-Ion
Speeds	Single Speed
Chute Material	Plastic
Type	Cordless Electric
Motor	Brushless
Wheels	8 in