EasyManua.ls Logo

SNOWJOE iON8024-XR - User Manual

SNOWJOE iON8024-XR
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2017 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC Model iON8024-XR Form No. SJ-iON8024-XR-880E-M
OPERATOR’S MANUAL
CORDLESS SNOW BLOWER
24-INCH | 80-VOLT | LED LIGHTS | SELF-PROPELLED | 2-STAGE
R
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions when using cordless snow blowers.
Basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury.
General Safety Rules
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
Keep bystanders away – All bystanders and pets should
be kept a safe distance away from the work area.
Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
Use the right product – Do not use this machine for any
job except that for which it is intended.
mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
Do not force the snow blower – Use the snow blower
at the rate for which it was designed to ensure optimal
performance and safe operation.
Stay alert – Watch what you are doing. Use common
sense. Do not operate the snow blower when you are tired
or under the inuence of alcohol or drugs.
Do not overreach – Keep proper footing and balance at
all times.
Store indoors – When not in use, the snow blower should
be kept dry and stored out of the reach of children in a high
or locked place.
Maintain snow blower with care – Follow instructions for
lubricating and changing accessories.
mWARNING! Always disengage both triggers, press
down the safety switch, turn o and remove the key from
the switch, and disconnect the battery packs; wait for all
movement to stop before making any adjustments, inspecting,
servicing, changing accessories, cleaning the snow blower,
or when any other dangerous conditions present. Any
such operation should be performed after revolving parts
inside the snow blower stop completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
mWARNING! When replacing any parts, you must strictly
observe the instructions and procedures described in this user
manual. Special care should be paid to any rubber parts, since
these parts may increase the engine load and decrease its
mechanical power if damaged.
mWARNING! If you notice that the snow blower is not
running properly or hear abnormal sounds from the engine
when it is in use, immediately stop the machine, disconnect the
battery packs, and contact Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Surfaces – This snow blower is intended for use on
paved surfaces. Do not use on gravel, stone or other
unpaved surfaces unless the snow blower is adjusted for
such surfaces according to the instructions given in the
operator’s manual.
Moving parts present risks – Keep your face, hair,
clothing, hands, and feet away from moving parts. All
guards and safety attachments must be installed properly
before using the unit. Shut o and disconnect the battery
packs before touching any parts other than the handles and
switch.
• Avoid unintentional starting – Make sure the safety switch
and the power switch are in the o position before inserting
the battery packs in the unit. Do not carry the snow blower
with the safety switch and the triggers engaged.
• Do not overreach – Maintain proper footing and balance at
all times. Place heels rmly on the ground and tightly grasp
the handle grips. Watch for uneven surfaces and do not
overreach. In case you fall or collide with the snow blower,
inspect the unit for any damages or cracks. When stepping
backwards, be careful to avoid obstacles beneath your feet
or behind you to avoid falling.
mWARNING! If the snow blower strikes any object,
follow these steps:
i) Stop the snow blower, remove key and remove the
battery packs.
ii) Inspect for damage.
Question and Answer IconNeed help?

Do you have a question about the SNOWJOE iON8024-XR and is the answer not in the manual?

Summary

Snow Blower Safety Instructions

General Safety Rules and Warnings

Covers work area, attire, product use, caution, and specific warnings for safe operation.

Battery and Charger Safety

Safe Handling and Charging Precautions

Guidelines for safe handling, charging, and storage of battery packs and chargers.

Battery and Charger Information

Battery, Charger, and Environmental Guidelines

Details on battery handling, charger operation, and protecting the unit from environmental factors.

Additional Safety Instructions

Walk-Behind Snow Blower Safety

Specific safety guidelines for walk-behind snow blowers, including controls, inspection, and operation.

Electrical Safety

Plug and Outlet Safety

Ensuring proper electrical connections and preventing accidental starting.

Safety Symbols

Understanding Safety Symbols

Explanation of symbols used in the manual and on the product for safety warnings.

Know Your Snow Blower

Unit Components and Features

Illustration and identification of the snow blower's controls, parts, and technical specifications.

Assembly Instructions

Handle Assembly

Step-by-step guide for attaching and securing the snow blower handles.

Component Assembly and Adjustment

Discharge Chute and Skid Shoes

Instructions for chute installation and skid shoe adjustment for optimal performance.

Battery Operation and Charging

Battery Charge Level and Charging Procedure

Understanding battery indicators and the process for charging the battery packs.

Control Panel Functions

Operating Controls and Features

Explanation of the control panel buttons for speed, lights, and transport modes.

Snow Blower Controls

Headlights, Triggers, and Switches

How to operate headlights, drive/auger triggers, power, and safety switches.

Operation Procedures

Pre-Start Checks and Machine Startup

Essential pre-start checks and step-by-step guide to safely starting the snow blower.

Driving and Snow Removal

Engaging Drive, Speed Selection, and Stopping

How to engage drive, select speed, and safely stop the snow blower.

Operating Tips and Travel

Best Practices and Transporting

Advice for efficient snow removal, handling obstructions, and moving the unit.

Maintenance and Care

Battery Care, Tire Pressure, and Part Replacement

Guidelines for battery/charger care, tire pressure, and replacing common wear parts.

Lubrication and Storage

Auger Shaft Lubrication and Off-Season Storage

Instructions for lubricating the auger shaft and storing the snow blower for the off-season.

Optional Accessories

Accessory List and Ordering Information

List of optional accessories for the snow blower, including batteries, chargers, and tools.

SNOWJOE iON8024-XR Specifications

General IconGeneral
Battery Voltage80 V
Battery Amp Hours4.0 Ah
Clearing Width24 inches
LightsYes
Auger MaterialSteel
LED HeadlightYes
BatteryLithium-Ion
Intake Height13 in. (33 cm)
Weight85 lbs
Power SourceBattery Powered
TypeCordless Electric Snow Blower

Related product manuals