EasyManua.ls Logo

SNOWJOE iON24SB-XR - User Manual

SNOWJOE iON24SB-XR
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2016 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
A Division of Snow Joe
®
, LLC
Model iON24SB-XR
OPERATOR’S MANUAL
SAVE THESE INSTRUCTIONS
80-VOLT 24-INCH CORDLESS
SNOW BLOWER
Form No. SJ-iON24SB-XR-880E-M
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions when using cordless snow blowers.
Basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury.
General Safety Rules
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
Keep bystanders away – All bystanders and pets should
be kept a safe distance away from the work area.
Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
Use the right product – Do not use this machine for any
job except that for which it is intended.
mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
Do not force the snow blower – Use the snow blower
at the rate for which it was designed to ensure optimal
performance and safe operation.
Stay alert – Watch what you are doing. Use common
sense. Do not operate the snow blower when you are tired
or under the inuence of alcohol or drugs.
Do not overreach – Keep proper footing and balance at
all times.
Store indoors – When not in use, the snow blower should
be kept dry and stored out of the reach of children in a high
or locked place.
Maintain snow blower with care – Follow instructions for
lubricating and changing accessories.
mWARNING! Always disengage both triggers, press
down the safety switch, turn o and remove the key from
the switch, and disconnect the battery packs; wait for all
movement to stop before making any adjustments, inspecting,
servicing, changing accessories, cleaning the snow blower,
or when any other dangerous conditions present. Any
such operation should be performed after revolving parts
inside the snow blower stop completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
mWARNING! When replacing any parts, you must strictly
observe the instructions and procedures described in this user
manual. Special care should be paid to any rubber parts, since
these parts may increase the engine load and decrease its
mechanical power if damaged.
mWARNING! If you notice that the snow blower is not
running properly or hear abnormal sounds from the engine
when it is in use, immediately stop the machine, disconnect the
battery packs, and contact Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Surfaces – This snow blower is intended for use on
paved surfaces. Do not use on gravel, stone or other
unpaved surfaces unless the snow blower is adjusted for
such surfaces according to the instructions given in the
operator’s manual.
Moving parts present risks – Keep your face, hair,
clothing, hands, and feet away from moving parts. All
guards and safety attachments must be installed properly
before using the unit. Shut o and disconnect the battery
packs before touching any parts other than the handles and
switch.
• Avoid unintentional starting – Make sure the safety switch
and the power switch are in the o position before inserting
the battery packs in the unit. Do not carry the snow blower
with the safety switch and the triggers engaged.
• Do not overreach – Maintain proper footing and balance at
all times. Place heels rmly on the ground and tightly grasp
the handle grips. Watch for uneven surfaces and do not
overreach. In case you fall or collide with the snow blower,
inspect the unit for any damages or cracks. When stepping
backwards, be careful to avoid obstacles beneath your feet
or behind you to avoid falling.
mWARNING! If the snow blower strikes any object,
follow these steps:
i) Stop the snow blower, remove key and remove the
battery packs.
ii) Inspect for damage.
iii) Repair any damage before restarting and operating
the snow blower.
Question and Answer IconNeed help?

Do you have a question about the SNOWJOE iON24SB-XR and is the answer not in the manual?

Summary

Safety Instructions

Operator Instruction Mandate

All operators must read and follow all instructions before operating the snow blower.

General Safety Rules

Critical Operational Warnings

Highlights key warnings regarding trigger engagement, part replacement, abnormal sounds, and object strikes.

Battery + Charger Safety Instructions

Safe Battery Handling and Use

Emphasizes safe use, avoiding dangerous environments, and proper charging procedures.

Battery Pack Warnings and Precautions

Covers warnings about using approved parts, avoiding damage, chemical hazards, and short circuits.

Information about the battery

Information about the charger and the charging process

Additional Safety Instructions

Safety Instructions for Walk-Behind Snow Blowers

Safe Operating Procedures

Covers avoiding excessive force, malfunctioning switches, object strikes, and discharge chute safety.

Electrical Safety

Plug and Outlet Compatibility

Ensures electrical plugs match outlets and avoids adapter plugs for shock prevention.

Accidental Starting Prevention

Make sure safety switch and triggers are off before inserting battery packs.

Assembly

Handle Assembly Procedure

Step-by-step guide for assembling the upper and lower handles of the snow blower.

Discharge Chute Assembly

Attaching the Discharge Chute

Guides on how to place and secure the discharge chute assembly to the gear plate.

Adjusting the Chute Deflector

Instructions for adjusting the chute deflector height for desired snow stream.

Skid Shoes Adjustment

Battery Pack Operation

Battery Charge Level Indicator

Explains how to check the battery charge level using the indicator lights.

Charger Operation

Safe Charging Practices

Provides warnings and instructions for safe and effective battery charging.

When to Charge the EcoSharp PRO iBAT40 XR Lithium-Ion Battery

Battery Charging Indicators

Guides on when to charge based on battery charge indicator lights.

Charging the Battery Packs

Step-by-Step Charging Procedure

Details the process of plugging in the charger and inserting battery packs for charging.

Controls + Features

Control Panel Overview

Describes the functions of the control panel buttons and indicators.

Auger and Drive Triggers

Explains the operation of the auger trigger and the drive trigger for propulsion.

Discharge Chute Deflector

Discharge Chute

Pre-Start

Emergency Stop

Immediate Shutdown Procedure

How to immediately stop the unit in an emergency situation.

Operation

To Engage Auger

Activating the Auger for Snow Throwing

Instructions on how to engage the auger trigger to start snow throwing.

To Engage Drive

Propelling the Snow Blower

How to select speed and engage the drive trigger for unit movement.

Snow Removal

Effective Snow Clearing Techniques

Guides on engaging auger and drive, and selecting speeds for snow removal.

Stopping the Machine

Safe Shutdown Procedure

Steps to safely stop the snow blower by releasing triggers and turning off the power.

Operating Tips

Proper Care for Battery + Charger

Replacing Skid Shoes

Replacing Scraper Blade

Replacing Shear Bolts

Replacing Auger Blades

Replacing Impeller

Replacing Auger Belt

Replacing Drive Belt

Lubrication

Battery Caution + Disposal Information

SNOWJOE iON24SB-XR Specifications

General IconGeneral
Power SourceBattery
Battery Voltage40V
Battery Ampere Hour5.0 Ah
Clearing Width24 inches
Auger MaterialSteel
Chute Rotation180 degrees
Chute ControlManual
WheelsYes
StageSingle-Stage
BatteryIncluded
TypeElectric
Clearing Depth13 in
Throw Distance (Max)32 feet

Related product manuals