SNOWJOE iON18SB-CT - User Manual

To Next Page

, LLC

A Division of Snow Joe

, LLC

Model iON18SB-CT

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

40-VOLT 18-INCH CORDLESS

SNOW BLOWER – CORE TOOL

Form No. SJ-iON18SB-CT-880E-M

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using cordless snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Keep bystanders away – All bystanders and pets should

be kept a safe distance away from the work area.

• Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

•

mCAUTION! – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Use safety glasses – Also use safety footwear, snug-tting

clothing, protective gloves, hearing and head protection.

• Do not force the snow blower – Use the snow blower

at the rate for which it was designed to ensure optimal

performance and safe operation.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Do not overreach –

Keep proper footing and balance at

all times.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instructions for

lubricating and changing accessories.

mWARNING! Turn o the power switch and disconnect

the battery before making any adjustments, inspecting,

servicing, changing accessories, cleaning the snow blower,

or when any other dangerous conditions present. Any

such operation should be performed after revolving parts

inside the snow blower stop completely. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the engine

when it is in use, immediately stop the machine, disconnect

the battery, and contact your service center.

• Surfaces – This snow blower is intended for use on

paved surfaces. Do not use on gravel, stone or other

unpaved surfaces unless the snow blower is adjusted for

such surfaces according to the instructions given in the

operator’s manual.

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts. All

guards and safety attachments must be installed properly

before using the unit. Shut o and disconnect the battery

before touching any parts other than the handles and

switch.

• Avoid unintentional starting – Make sure the safety switch

and the switch bar lever are in the o position before

inserting the battery in the unit. Do not carry the snow

blower with the safety switch and the switch bar lever

engaged.

• Do not overreach – Maintain proper footing and balance

at all times. Place heels rmly on the ground and tightly

grasp the handle bar. Watch for uneven surfaces and do not

overreach. In case you fall or collide with the snow blower,

inspect the unit for any damages or cracks. When stepping

backwards, be careful to avoid obstacles beneath your feet

or behind you to avoid falling.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower. Remove the battery.

ii) Inspect for damage.

iii) Repair any damage before restarting and operating

the snow blower.

Main Page

Need help?

Do you have a question about the SNOWJOE iON18SB-CT and is the answer not in the manual?

Summary

Safety Instructions

General Safety Rules

Essential safety rules for operating the snow blower safely and preventing accidents.

Warnings and Cautions

Critical warnings and cautions regarding operation, hazards, and maintenance procedures.

Battery & Charger Safety

Battery Handling Precautions

Precautions for safe handling of battery packs and avoiding dangerous environments.

Charger and Battery Warnings

Warnings related to charging, damage, and potential hazards from batteries.

Battery and Charger Information

Charger and Charging Process

Information on charger connection, charging process, and safety during charging.

Environmental Protection and Additional Safety

Snow Blower Operation Safety

Specific safety instructions for walk-behind snow blowers, including inspections and operation.

Product Overview and Specifications

Battery Operation and Charging

Battery Charge Level Indicator

Charger Operation and When to Charge

Operating the charger and guidance on when to recharge the battery pack.

Charging the Battery

Charging Steps and Indicators

Detailed steps for charging and understanding the charger's indicator lights.

Starting and Operating the Snow Blower

Battery and Safety Key Insertion

Steps for inserting the battery and safety key to prepare the unit for operation.

Pre-Operation Checks and Start

This document describes the Snow Joe® ION18SB-CT 40-Volt 18-Inch Cordless Snow Blower – Core Tool, an operator's manual providing essential information for safe and effective use, maintenance, and storage of the device.

Function Description:

The Snow Joe® ION18SB-CT is a cordless snow blower designed for residential use on paved surfaces. Its primary function is to clear snow efficiently, offering a convenient and powerful solution for snow removal without the constraints of a power cord. The "Core Tool" designation indicates that the battery and charger are not included and must be purchased separately. The snow blower is compatible with EcoSharp® iBAT40 (40V 4.0 Ah) and EcoSharp® PRO iBAT40XR (40V 5.0 Ah) lithium-ion batteries, and EcoSharp® iCHRG40 or EcoSharp® SWIFT iCHRG40QC chargers.

The device features an 18-inch clearing width and an 8-inch depth of snow cut, making it suitable for moderate snowfalls. It can throw snow up to 20 feet (6 meters) and has a plowing capacity of 500 lbs/min (227 kg/min). The 180° auto-rotate chute allows for directional control of the snow stream, while the chute deflector can be adjusted to control the height of the throw. An integrated 3-watt LED light provides illumination for nighttime snow removal.

Safety is a paramount concern, with numerous instructions provided to prevent accidents and ensure proper operation. These include keeping the work area clear of bystanders and foreign objects, wearing appropriate protective gear, and understanding how to safely start, stop, and maneuver the snow blower. The device is designed with a safety switch button and an ON/OFF switch bar lever to prevent unintentional starting.

Important Technical Specifications:

Model: ION18SB-CT
Battery Voltage: 40 V D.C. (nominal voltage under typical load is 36 volts)
Compatible Batteries (Sold Separately):
- EcoSharp® 40V 4.0 Ah Lithium-Ion Battery (iBAT40)
- EcoSharp® PRO 40V 5.0 Ah Lithium-Ion Battery (iBAT40XR)
Compatible Chargers (Sold Separately):
- EcoSharp® 40V Lithium-Ion Battery Charger (iCHRG40)
- EcoSharp® SWIFT Battery Charger (iCHRG40QC)
Charging Time:
- 2.5 - 3 hours (using iBAT40 with iCHRG40)
- 3 - 3.5 hours (using iBAT40XR with iCHRG40)
Battery Runtime (Max):
- 50 min (using iBAT40)
- 65 min (using iBAT40XR)
No Load Speed: 2,500 rpm
Rotor: Steel auger with 2 rubber blades
Motor: Brushless
Clearing Width: 18 in. (45.7 cm)
Depth of Snow Cut: 8 in. (20.3 cm)
Throw Distance (Max): 20 ft (6 m)
Plowing Capacity (Max): 500 lbs/min (227 kg/min)
Directional Control: 180° auto-rotate chute
LED Light: 3 watt
Weight (snow blower alone): 28.7 lbs (13 kg)
Weight (snow blower with battery installed): 32 lbs (14.5 kg)

Usage Features:

The snow blower is designed for user-friendly operation.

Assembly: The handles are easily assembled by pulling up the upper frame and securing connections with handle locks and knobs. The chute deflector is lifted and locked into place, and its height can be adjusted by loosening/tightening deflector knobs.
Battery Operation: The unit is powered by a lithium-ion battery. A push button on the battery pack allows users to check the charge level via three LED indicators (high, decreasing, flat). The battery pack should be fully charged before first use and frequently charged to avoid low discharge cycles.
Charging: The charging process involves pulling the battery pack out of the equipment, connecting the charger to an electrical outlet, and sliding the battery pack into the charger. Indicator lights on the charger show charging status (red for charging, green for fully charged). The charger also indicates temperature abnormalities (flashing red/green) or other errors (flashing red only).
Starting the Machine: To start, open the battery compartment, slide the battery in until it clicks, insert the safety key, and close the cover. Then, press the safety switch button and pull the ON/OFF switch lever. The machine will only start if these steps are followed in sequence. To power off, release the ON/OFF switch bar lever.
Operating Tips: Users are advised to clear the area of foreign objects before operation, keep children and bystanders away, and be aware of wind direction to avoid snow being thrown back. The snow blower should be pushed gently and evenly, without excessive force. Frozen parts should be thawed before operation. For unpaved surfaces, pushing down on the handle can raise the scraper to avoid throwing loose material. An LED light switch activates the headlight for nighttime use.
Changing Throw Direction and Height: The discharge chute can be rotated 180 degrees using a remote switch to control the snow throw direction. The chute deflector on top can be raised or lowered by loosening/tightening knobs to adjust the height of the snow stream.

Maintenance Features:

Regular maintenance is crucial for the longevity and safe operation of the snow blower.

General Maintenance:
- Do not attempt repairs without proper tools and instructions.
- Check bolts and screws frequently for tightness.
- After each use, run the snow blower for a few minutes to prevent freezing of the collector/impeller, then shut off, allow parts to stop, and wipe off residual ice and snow. Rotate the chute deflector several times to remove excess snow.
Battery/Charger Care:
- Always unplug the charger and remove the battery before maintenance.
- Never immerse the battery pack or charger in liquid.
- Clean dust and debris from charger vents and electrical contacts with compressed air.
- Use only mild soap on a damp cloth to clean the battery pack and charger, avoiding electrical contacts. Avoid harsh cleaning agents and solvents.
- The EcoSharp® iCHRG40 and iCHR40QC chargers have no serviceable parts.
Replacing Rubber Plates: If the rubber plates are worn, they can be replaced by removing the 8 sets of nuts and bolts that secure them. New plates should be inserted in the reverse order of removal.
Replacing Scraper Bar: The scraper bar, located at the base of the snow blower, can be replaced by removing the 4 screws holding it in place and then fastening the new bar securely.
Storage: Before storing, thoroughly examine the snow blower for worn, loose, or damaged parts and repair as needed. Clean the unit, remove the battery and safety key, and store it indoors in a locked, dry place out of reach of children.
Battery/Charger Off-Season Storage: Store the battery pack and charger at room temperature, away from moisture. Recharge the battery pack every 6 months to 50% capacity (2 lights on) during off-season storage to maintain optimal performance. Do not store in temperatures over 120°F (49°C).
Disposal: Dispose of battery packs according to federal, state, and local regulations. Cover terminals with electrical tape before disposal to prevent shorting. Never burn or incinerate battery packs.