8
5. QUICK START GUIDE
Step 1: Charge your Pico
Attach the power cord to the charging dock. Ensure that the Pico is
seated on the charging dock and close the case lid. Leave your Pico
charging for one hour.
Step 2: Download the Snuza Connect App
Snuza Connect is available on iOS and Android.
Must support: · Bluetooth 4.0
· Apple devices: iOS 8.0 or later
· Android devices: Android 4.4 or later
Step 3: Register your Pico
Go to www.connect.snuza.com. Select the Register New Membership
option and complete the required fields.
A confirmation email will be sent to your selected email address. Once
confirmed, you will be taken to the Snuza Portal. Navigate to the ‘Device
Registration’ tab in the menu.
Enter your device serial number and complete the required detail fields.
The serial number can be found on the side of the Pico, or on the side of
the Pico packaging.
Step 4: Attach your Pico
Fold over the top edge of your baby’s diaper and fit the diaper snugly.
Lift the clip to release and place the Pico on your baby’s diaper. Ensure
that the clip is properly closed once placed.
Step 5: Turn on your Pico and start monitoring
Turn on the Pico by pressing and holding the power button until the start-
up tone is heard and all indicator lights flash simultaneously.
To Next Page
Loading...
Need help?
General
