14
8.5 Indicator lights
Startup and shutdown sequences
Startup using power button
When Snuza Pico is switched ON using the power button (6), the
indicator lights (1, 2, 4, 5) will flash in sequence from left to right,
followed by a startup tone. Immediately after the startup tone, the
battery indicator light (2) will flash to indicate the state of the
battery when it is switched on. The battery indication has the
following meaning:-
Battery is low but should last another
few hours
Battery is very low and should be
charged
Red followed
by shutdown
tone
Battery is too depleted for operation
and Snuza Pico has automatically shut
down. Please charge immediately.
Startup using APP
When Pico is switched ON using the App, no audible tone is
played, but the usual startup indicator light flash sequence will
occur.
Battery information is displayed on the App dashboard so it is not
necessary to observe the battery LED during remote startup.
Switch off using button
When Snuza Pico is switched OFF using the button, indicator lights
will flash in a sequence from right to left, followed by a shutdown
tone.
To Next Page
Loading...
Need help?
General
