Soca ST-120 - Page 6

5
system password and press # subsequently to enter into system
setting mode. When entered into system setting mode, the
STATUS light (green ) on the panel will be on with a beep sound.
Users should enter any functional selections within 20 seconds.
The reader will automatically terminate the system setting mode
function after 20 seconds.
1.
Add one card :
To register user’s card and utilize proximity
to register.
On the above operation, if “
＊
” is being pressed, the card
registration activities will be terminated.
2. Delete card :
Deletion of user’s card (such as loss of card), card
number is the 6-digit code indicated on the proximity card.
CARD POXIMITY
( NEXT ONE)
PRESS
1
1 BEEP
SOUND
ENTER “½# ”
SYSTEM
PASSWORD # ”
STATUS LIGHT ON
WITH A BEEP SOUND
3 BEEP
SOUNDS
REGISTRATION
SUCCESSFULLY
REGISTRATION
FAILED
(REPEAT REGISTRATION)
PRESS ＊
TERMINATE
CARD PROXIMITY
ENTER THE USER’S
CARD 6-DIGIT NUMBER
1 Beep
sound
CARD POXIMITY
( NEXT ONE)
CARD POXIMITY
( NEXT ONE)
PRESS
1
PRESS
1
1 BEEP
SOUND
1 BEEP
SOUND
ENTER “½# ”
SYSTEM
PASSWORD # ”
STATUS LIGHT ON
WITH A BEEP SOUND
STATUS LIGHT ON
WITH A BEEP SOUND
3 BEEP
SOUNDS
REGISTRATION
SUCCESSFULLY
REGISTRATION
FAILED
(REPEAT REGISTRATION)
PRESS ＊PRESS ＊
TERMINATETERMINATE
CARD PROXIMITY
ENTER THE USER’S
CARD 6-DIGIT NUMBER
CARD PROXIMITY
ENTER THE USER’S
CARD 6-DIGIT NUMBER
1 Beep
sound
PRESS
2
ENTER “½# ”
SYSTEM
PASSWORD “# ”
STATUS LIGHT ON
WITH A BEEP
SOUND
PRESS ＊
TERMINATE
1 BEEP
SOUND
PRESS
2
ENTER “½# ”
SYSTEM
PASSWORD “# ”
STATUS LIGHT ON
WITH A BEEP
SOUND
STATUS LIGHT ON
WITH A BEEP
SOUND
PRESS ＊PRESS ＊
TERMINATETERMINATE
1 BEEP
SOUND
1 BEEP
SOUND
www.ealarm.com.my