4. If desired, attach the tether to the battery cover. Wrap the string loop around the inside
part of the lock.
5. Replace the battery cover and turn the lock to a vertical position to secure it.
WARNING: Do not install the batteries incorrectly. Damage may result.
WARNING: Charge ONLY NiMH batteries in the CHS. Damage may result if alkaline
or other battery types are charged. Do not store the CHS for more than 30 days
with the batteries installed.
The red Battery Status LED will not function properly if standard AAA non-
rechargeable batteries are being used.
Battery Type NiMH rechargeable AAA
Battery Life ~19 hours to scan 15,000+ barcodes for new, fully charged
batteries
ASSEMBLING THE AC ADAPTER
If you wish to charge the CHS with the AC adapter, the correct plug for your region
must be attached first. Four different plugs are included. Simply find the correct
plug for your region and slide it into the head of the adapter until it latches. Plug
in the cable, making sure the USB connector is oriented the correct way.
The charger cannot be sold in Japan.
12
To Next Page
Loading...
