CHAPTER 4: SETUP FOR ANDROID 23
OPTION 1: USING THE CHS IN HID MODE
Compatible with devices running Android 2.2 and later that support Bluetooth HID
connections for Peripheral devices.
To pair the CHS with your Android device:
You only need to pair the CHS with your Android device the first time you try to
connect.
1. Power on the CHS. Press and hold the small power button until the LED turns blue and
the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is on but not
connected.
2. Make sure the CHS is in HID mode for Peripheral Devices.
First scan this barcode to change the CHS to HID mode.
Next scan this barcode to change the CHS to HID mode for Peripherals.
To Next Page
Loading...
