Socket 7Ci - Setup for Blackberry

84
7 | SETUP FOR BLACKBERRY
This chapter explains how to install and use the Bluetooth Cordless Hand Scanner (CHS)
with one of the following BlackBerry devices:
 BlackBerry® Bold 9700 Smartphone running BlackBerry OS 5.0.0.714 or later. Other
models have not been tested with SocketScan 10 and may require a previous software
version. Works in Bluetooth SPP mode only.
 BlackBerry PlayBook running QNX. Works in Bluetooth HID mode only.
For instructions for the Bold 9900, please visit:
http://www.socketmobile.com/pdf/data-c
ollection/chs-7ci_blackberry-9900.pdf
Before you begin the instructions in this chapter, make sure you have installed the
batteries (and tether, if desired), and charged the scanner, as described in Chapter 2,
“Scanner Setup”