30
To pair the CHS with your Android device:
You only need to pair the CHS with your Android device the first time you try to
connect.
The following instructions are based on Socket EZ Pair, a feature of SocketScan 10
software. For instructions on how to connect by generating and scanning a special
barcode, please see Appendix G
.
1. Power on the CHS. Press and hold the small power button until the LED turns blue
and the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is on but not
connected.
2. Make sure the device has Bluetooth on.
3. In SocketScan 10, touch Menu | Socket EZ Pair.
To Next Page
Loading...
