Socket 7Mi - Page 101

APPENDIX F: COMMAND BARCODES 101
Data Suffix — For SPP or iOS Mode
Data As Is (Default)
Configures the CHS to return
only the decoded data (i.e., no
prefix or suffix).
Suffix – Carriage Return
Configures the CHS to add a
carriage return after decoded
data.
Suffix – Tab
Configures the CHS to add a
tab after decoded data
Suffix – Carriage Return &
Line Feed
Configures the CHS to add a
carriage return and line feed
after decoded data.
Power Button Double Press Key Combination — For HID Mode Only
Scan to Enable WITH BEEP Description Scan to Enable WITHOUT BEEP
CTRL + Z
CTRL + A
SHIFT + TAB
CTRL + S