Socket 8 Series - iOS MODE; Connect Apple Device in iOS Mode

iOS MODE
Connect Apple device in iOS Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstoretoconrmyourScanner-enabled
application supports the CHS.
If you are using the CHS with an Apple iOS device and a Scanner-enabled
Application that does not provide instructions how to connect with the
CHS, please use the following steps.
1. Power on the CHS. Make sure the CHS is discoverable (unpaired).
2. TochangetheproletoiOSmodescanthisbarcode.TheCHSwill
beep 3 times.
Use with iPad, iPod touch, and iPhones.
13