Socket 8 Series - Connect Apple Device in iOS Mode (continued)

iOS MODE
3. Turn Bluetooth on the Apple device. Go to Settings > Bluetooth.
A Bluetooth Devices search will begin.
4. Tap Socket CHS[xxxxxx] in the list of Devices found. After a few
seconds the “Not Paired” status will change to “Connected” and the
CHSBlueLEDwillblinkevery3secondsconrmingtheconnection.
Note: The characters in brackets are the last 6 characters of the
Bluetooth Address. The full Bluetooth address is printed on the Product
label.
5. Open the Scanner-enabled Application. The CHS will beep once
indicating that it is connected to the appropriate application.
Now you are ready to scan barcodes.
14