Socket 8 Series - Connect Windows PC

HID MODE
Connect Windows PC
Power on the CHS. Make sure the CHS is discoverable (unpaired).
1. Use your computer’s Bluetooth Settings to connect to the CHS.
2. Open Devices and Printers and select “Add a device”.
3. In the device list, select Socket CHS [xxxxxx]. Click Next.
4. If a passkey is requested, enter 0000 (four zeroes). Click OK.
Or Pair Now.
5. Follow the remaining screens to complete the wizard.
Note:OnsomecomputerstheCHSwillhavetobeconguredasHID
Periferal. Please refer to the User Guide to see this special barcode.
The User Guide at Socket Mobile’s support web page.
Note: For Windows Mobile refer to the User Guide at Socket Mobile’s
support web page.
8