Socket 8 Series - SPP MODE; Connect Android Device via EZ Pair

SPP MODE
9
Connect Android device in SPP Mode using EZ Pair
1. Go to Google Play Store, search for “SocketScan 10”.
2. Download & install. Follow the on screen instructions.
Note: If prompted, allow the app to access your Bluetooth settings /
USB storage / SD card / Coarse location.
3. Make sure Bluetooth is turned on.
4. Open SocketScan 10 application.
5. When prompted to set SocketScan 10 as the keyboard language, tap
Back .
6. Go to Settings / Language and Input
7. Under Keyboard Settings, select SocketScan 10.
8. Open SocketScan 10 on your device.
9. When prompted to enable SocketScan 10 as Input Method,
tap Back .
10. Tap the Menu icon, then select Input Method.
11. On the next screen, select SocketScan 10 as input method.
12. Power on the CHS. Make sure the CHS is discoverable (unpaired).
13. In SocketScan 10, tap the Menu icon then select Socket EZ Pair.
14. Scan the barcode on the screen to switch or set your scanner in SPP
mode. The CHS will beep 3 times.