20
Decode UPC/EAN Supplemental Redundancy
Parameter # 0x50
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number
of times a symbol without supplementals will be decoded before transmission. The range
is from 2 to 20 times. Five or above is recommended when decoding a mix of UPC/EAN
symbols with and without supplementals, and the autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two numeric bar
codes beginning on page 82 Single digit numbers must have a leading zero. To change
the selection or cancel an incorrect entry, scan the Cancel bar code on page 84.
Decode UPC/EAN
Supplemental Redundancy
(Default: 7)
To Next Page
Loading...
