Socket SocketScan User Manual

SocketScan
™
Software
Advanced Programming Guide
A guide to help you program symbology and parameter settings for the
following Socket barcode scanning products:
• Secure Digital Scan Card Series 3
• CompactFlash Scan Card Series 5 and 5 Rx
• CompactFlash RFID Reader-Scan Card Series 6
• Socket Bluetooth® Cordless Hand Scanner Series 7 and 7 Rx
• Socket Bluetooth® Cordless Ring Scanner Series 9
NOTE: This guide pertains only to Socket barcode scanners made
after May 2006.
Please compare the revision letter of your product to the one listed
on page 4 to determine if this is the correct programming manual for
your product.

Socket SocketScan Specifications

General

Brand	Socket
Model	SocketScan
Category	Software
Language	English

Summary

Parameter Support

How to Use this Programming Guide

Explains how to use the programming guide to identify scanner models and their capabilities.

Motorola SE-955 and CSE-600

Programming Methods for SE-955 and CSE-600

Details methods for programming scanners using barcodes or serial commands.

Parameter Numbers Overview

Lists parameter numbers and corresponding page numbers for various barcode symbologies.

UPC/EAN Symbology Configuration

Covers parameters for enabling/disabling and configuring UPC-A, UPC-E, EAN-8, EAN-13, and Bookland EAN.

Code 128 Symbology Configuration

Details parameters for enabling/disabling and configuring Code 128 and related symbologies.

Code 39 Symbology Configuration

Covers parameters for enabling/disabling and configuring Code 39 and its variants.

Code 93 Symbology Configuration

Details parameters for enabling/disabling and configuring Code 93 symbology.

Interleaved 2 of 5 Symbology Configuration

Covers parameters for enabling/disabling and configuring Interleaved 2 of 5 symbology.

Discrete 2 of 5 Symbology Configuration

Details parameters for enabling/disabling and configuring Discrete 2 of 5 symbology.

Codabar Symbology Configuration

Covers parameters for enabling/disabling and configuring Codabar symbology.

MSI Symbology Configuration

Details parameters for enabling/disabling and configuring MSI symbology.

RSS Symbology Configuration

Covers parameters for enabling/disabling and configuring RSS (GS1 DataBar) symbologies.

Code 11 Symbology Configuration

Details parameters for enabling/disabling and configuring Code 11 symbology.

WebCode Symbology Configuration

Covers parameters for enabling/disabling and configuring WebCode and GT WebCode.

General Scanner Operation Parameters

Configures scanner behavior like laser time, scan angle, code ID transmission, security, and redundancy.

Intermec EA15

Intermec EA15 Initial Setup

Guides users through initial setup of the EA15, including factory defaults and basic configurations.

Optimizing EA15 Reading Performance

Explains how to adjust imager parameters for optimal reading performance.

EA15 Setup Group Commands

Details commands for configuring specific symbologies like AustraliaPost, Aztec, BPO, and Codabar.

Appendix A GS1-128

Reading Standard Code 128 & GS1-128 Behavior

Explains the behavior of scanners when reading Standard Code 128 and GS1-128 symbologies.

Appendix B Scan Params WinCE Utility

WinCE Utility: Get and Set Data

Describes retrieving and setting scanner parameters using the WinCE utility.

WinCE Utility: Persistence Settings

Explains how to make settings persistent across power cycles using the WinCE utility.

WinCE Utility: Connecting Bluetooth Scanners

Guides on connecting Bluetooth scanners to the WinCE utility for configuration.

Appendix C Scan Params Palm Utility

Palm Utility: Get and Set Data

Describes retrieving and setting scanner parameters using the Palm utility.

Palm Utility: Persistence Settings

Explains how to make settings persistent across power cycles using the Palm utility.

Palm Utility: Connecting Bluetooth Scanners

Guides on connecting Bluetooth scanners to the Palm utility for configuration.