86
3 | Intermec EA15
This chapter provides the programmable parameters, programming barcodes, and serial commands
for the Socket barcodes scanners equipped with the Intermec EA15 barcode scanning engine. Please
refer to the tables in Chapter 1 to determine which scanning engine your product uses, and which
parameters/symbologies it supports.
You can program parameters for the EA15 using either of two methods:
To program using programming barcodes
Scan the appropriate barcodes included in this chapter. The new value permanently replaces the
existing memory value.
To program via serial commands:
Send the parameter through the scan engine’s serial port using the SSI command PARAM_SEND.
Hexadecimal parameter numbers are shown in this chapter below the parameter title, and options
appear in parentheses beneath the accompanying barcodes.
CSE-600
: Socket has created a Configuration Utility (ScanParams.exe) that makes it easy for Pocket
PC or Palm users to send serial commands to products using EA15. Download the utility from
Socket’s website at: http://www.socketmobile.com/support/downloads
To Next Page
Loading...
