Socket SocketScan - Control Group Commands; Status Group Commands

107
Message Format, GID = 0x60
Serial Interface, GID = 0x63
Control Group Commands
Use control commands to allow the host to control the EA15. All GID and
FID values are in hexadecimal.
Configuration, GID = 0x40
Status Group Commands
Use the status commands when you want the host to know the value of
certain status parameters in the EA15. All GID and FID values are in
hexadecimal.
Hardware, GID = 0x30
Configuration, GID = 0x40
Function FID Default Parameter
symbology identifier 40 disabled
Function FID Default Parameter
baud rate 40 19200
RTS / CTS hardware protocol 41 disabled
flow control 80 1000 ms
data bits 42 8
parity 43 none
stop bits 44 1
Function FID Default Parameter
disable all symbologies 03 no default
user reset factory defaults 04 no default
Function FID Value
version C0 no default
decode version C2 no default
sub-system version C4 no default
Function FID Default Parameter
configuration signature C0 no default