Socket SocketScan - Page 45

45
Enable/Disable Code 39 Full ASCII
Parameter # 0x11
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII
character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code
below.
Refer to Table B-3 on page B-4 for the mapping of Code 39 characters to ASCII values.
Enable Code 39 Full ASCII
(0x00)
*Disable Code 39 Full ASCII
(0x00)
Note: Trioptic Code 39 and Code 39 Full ASCII cannot be enabled
simultaneously. If you get an error beep when enabling Code 39 Full
ASCII, disable Trioptic Code 39 and try again.