Socket SocketScan - Page 88

88
2 Scan one of these bar codes to set the baud rate (* = default value):
baud rate 38400
\60\02\48\40\00\18\00
baud rate 57600 (*)
\60\02\48\40\00\1A\40
3 Scan one of these bar codes to set the stop bits:
stop bits 1 (*)
\60\02\48\44\00\00\00
stop bits 2
\60\02\48\44\00\02\40
4 Scan one of these bar codes to set the postamble:
postamble none
\60\02\48\40\00\18\00
postamble Carriage Return + Line Feed(*)
\60\02\48\40\00\1A\40
5 Scan this bar code to disable all symbologies:
disable all symbologies
\60\08\55\23