socomec COUNTIS E44 User Manual

Three-phase Energy meter Measure via CT
up to 12 000A - RS485 MODBUS
COUNTISE43/E44
www.socomec.com/en/countis-e4x
COUNTIS E43 COUNTIS E44 - MID
INSTRUCTION MANUAL
EN

socomec COUNTIS E44 Specifications

General

Type	Energy Meter
Display	LCD
Mounting Type	DIN Rail
Output Type	Pulse Output
Frequency	50/60 Hz
Measurement	Active energy, Reactive energy, Active power, Reactive power, Apparent power, Voltage, Current, Frequency, Power factor
Communication	Modbus RTU, M-Bus
Protection Degree	IP20 (terminal)
Installation	DIN rail

Summary

HAZARDS AND WARNINGS

Risk of electrocution, burns or explosion

Details risks associated with electrocution, burns, and explosion during installation and operation.

LCD display

Electrical values measured

Measurements

INSTALLATION

Recommendations and safety

Provides safety recommendations and precautions for installing the device.

CONNECTION

Connecting the COUNTIS E43/E44

Details the wiring and connection procedure for the COUNTIS E43/E44 device.

Connection to the electrical network and to the loads

Explains how to connect the device to the three-phase electrical network and loads.

COMMUNICATION

RS485 rules

Communication structure

CONFIGURATION

Onscreen configuration

Describes how to configure the device settings directly using the screen interface.

Detailed view of menu "SETUP 1"

View all of the menu "SETUP 2"

Detailed view of menu "SETUP 2"

Example: setting the communication address

USE

Detailed view of the menu for tariff 1, "Tar.1"

Detailed view of the menu for tariff 2, "Tar.2"

Detailed view of the menu for tariff 3, "Tar.3"

Detailed view of the menu for tariff 4, "Tar.4"

Detailed view of the total menu, "tot"

Detailed view of the menu showing partial readings and the energy balance "Par.b"

Starting up the partial energy meter

Stopping the partial energy meter

Resetting the partial energy meter to zero

Detailed view of the menu for realtime readings, "rt"

DIAGNOSTICS MESSAGES

Missing phases

Reversed phases

Malfunction

ASSISTANCE