Need help?Do you have a question about the socomec COUNTIS E24 and is the answer not in the manual?
General| Brand | socomec |
|---|---|
| Model | COUNTIS E24 |
| Category | Measuring Instruments |
| Language | English |
Details risks of electrocution, burns, or explosion and required safety measures for handling the device.
Specifies conditions to ensure correct operation and prevent damage to the device.
Advises on safety precautions and environmental considerations during installation.
Explains the method for mounting the COUNTIS E23/E24 on a 35-mm DIN rail.
Illustrates the connection points and specifications for wiring the energy meter.
Details the specific connections for three-phase networks with neutral, including Modbus and pulse outputs.
Provides guidelines for using shielded twisted pair cables, repeaters, and termination resistors.
Guides through the process of changing settings directly on the COUNTIS E23/E24 screen.
Explains how to select tariff management mode (Modbus or T1/T2 inputs) in SETUP 1.
Lists the available configuration options within the SETUP 2 menu, including communication and energy reset.
Details how to set the communication address for the device.
Explains how to set the communication speed (baud rate) for the device.
Describes how to configure the communication frame parity (None, Odd, Even).
Explains how to set the number of stop bits for communication.
Details how to reset partial energy values for tariffs and balances.
Provides a step-by-step example for changing the communication address to 247.
Describes the indicator and cause for missing phases on the display.
Explains indicators and causes for reversed phase sequences (123 or 132).
Indicates that the meter has malfunctioned and requires replacement.
To Next Page
