Need help?Do you have a question about the socomec COUNTIS E33 and is the answer not in the manual?
General| Brand | socomec |
|---|---|
| Model | COUNTIS E33 |
| Category | Measuring Instruments |
| Language | English |
Precautions to prevent electric shock, burns, or explosion.
Checks to ensure correct voltage, frequency, and current.
Essential to read instructions before first use. Check package contents.
Check packaging, product, part number, and contents upon receipt.
Describes the meter's capabilities, connection, and display.
RS485 interface, JBUS/MODBUS protocol, and key meter functions.
Identifies display, buttons, and LEDs on the meter.
Advice on cable types, termination resistors, and protocol modes.
Mounting on 35mm rail and required screwdriver types.
Ensures meter accuracy by connecting all three phases; provides wiring diagrams.
Illustrates the single-phase connection with neutral.
Function to detect phase connection errors for accurate readings.
Conditions for testing, how to run it, and interpreting results/errors.
Manual setting of parameters vs. automatic configuration.
Accessing programming mode and selecting Manual/Auto.
Procedure to move to the next menu item.
Setting the communication address for the device.
Setting the communication speed (baud rate).
Setting the communication parity (odd/even/none).
Setting the stop bit for communication (1 or 2).
Automatic exit after inactivity; configuration is not saved.
Setting the communication address when in automatic mode.
Shows partial meter, energy production/consumption, error, and tariff displays.
Displays various parameters, units, and phase status.
Displays total energy consumption for each tariff (T1-T4).
Displays the sum of all tariff energy consumptions.
Displays partial energy consumption for each tariff (T1-T4).
Displays the sum of all partial tariff energy consumptions.
Displays total and partial amounts of energy generated.
Shows the current power consumption with direction.
Resets all partial meters to zero by pressing the reset button.
Steps for power issues, communication malfunctions, and error messages.
Steps to resolve issues with phase presence indicators.
Specifies supply types, number of wires, and operating frequency.
Details power supply, consumption, and current/voltage ratings.
Covers powers, energy metering, accuracy class, and tariff management.
Details display type, refresh time, and backlight.
Details communication interface, protocol, backup, and environmental data.
Specifies housing dimensions, mounting, and terminal capacities.
Covers optional features and product recycling compliance.
To Next Page