Need help?Do you have a question about the socomec COUNTIS E53 and is the answer not in the manual?
General| Type | Energy meter |
|---|---|
| Input Current | 5A |
| Display | LCD |
| Mounting type | DIN rail |
| Output type | Pulse output |
| Protection degree | IP20 |
| Measurement | voltage, current, power factor, frequency |
| Current Range | 5A |
| Accuracy | Class 1 |
| Number of phases | Three-phase |
| Frequency range | 50-60 Hz |
| Operating temperature | -25°C to +55°C |
| Storage temperature | -40°C to +70°C |
| Dimensions | 90mm x 70mm x 65mm |
| Voltage Range | 100-480V AC |
| Input Voltage | 100-480V AC |
Essential safety precautions to prevent severe injury or death during operation and maintenance.
Critical parameters to respect to avoid damaging the device, such as voltage and current limits.
Detailed instructions on correctly connecting current transformers and voltage inputs.
Step-by-step guide on how to access the programming mode using the default code.
Setting the ratio for current transformers (e.g., 1200/5A) during programming.
Configuring the device's communication address for network integration.
Conditions needed for the connection test, including presence of current and voltage, and PF range.
Explanation of error codes (Err 01-06) related to incorrect CT or voltage connections.
Guidance on how to manually correct wiring errors based on the test results.
To Next Page