socomec COUNTIS E13X User Manual

Socomec Innovative Power Solutions
11 Ubi Road 1, #02-01 Meiban Industrial Building
Singapore 408723
http://www.socomec.com
COUNTIS E13X
Single Phase Meter 100A Direct Connection
User Manual
1. Introduction
Socomec COUNTIS E13X is a single phase DIN Rail meter, 100A, which is a multi-functional meter for
energy monitoring.
It is only 18mm width, but can support RS485 communication and comply with DIN EN 50022 standard,
which is fit for the power distribution system for household and commercial.
2. Features and Technical Parameters
2.1 Features
● It can read grid parameters, analyze the energy quality and load condition in the certain time period.
● DIN RAIL (Comply to German Industry Standard ) mounted.
● Only 18 mm wdith, but can achieve 100A.
● Support RS485 communication, Protocol: Modbus-RTU mode.
● Multi-tariff function. The user can set the different time periods via RS485.
● The meter has Li-battery for RTC. The RTC accuracy is 0.5s every day.
● Blue backlight, which is for easy reading in dark place.
● Do scrolling display for current(A) and voltage(V).
● Measure the active and reactive energy accurately.

socomec COUNTIS E13X Specifications

General

Display Type	LCD
Number of Modules	4
Measurement	Active energy
Communication	Modbus RTU (RS485)
Mounting Method	DIN rail
Output Type	Pulse
Number of Phases	3
Frequency	50...60 Hz
Protection Degree	IP20
Technology	Digital
Voltage	230/400V AC

Summary

Introduction

Features and Technical Parameters

2.1 Features

Lists key features including grid parameter reading, DIN Rail mounting, 100A capacity, RS485 communication, multi-tariff, RTC battery, backlight, and display scrolling.

2.2 Technical Parameters

Details data display modes (auto scrolling, button), meter case material (ABS resistance), and protection class (IP51).

Description

LCD Display

4.1 LCD Screen Dimensions

Presents the physical dimensions of the LCD screen, including pitch and overall size specifications.

4.2 LCD Parameters/Parameters Switch

Details the parameters displayed on the LCD screen and how to switch between them, showing voltage, current, and power.

Wiring Connection

Dimensions

Installation Instruction

7.1 Select 35 mm Standard DIN Rail and fix it.

Instructions for selecting and fixing a 35 mm standard DIN Rail for meter installation.

7.2 Push the DIN Rail Clip, see details in Fig.1 and Fig. 2

Guidance on pushing the DIN Rail Clip to secure the meter, referring to specific figures.

7.3 Install the meter onto the DIN Rail, then push the DIN Rail Clip of the meter to fix the meter

Details the process of mounting the meter onto the DIN Rail and securing it with the clip.

7.4 Do the connection according to the wiring diagram.

Instructs users to perform the electrical connections following the provided wiring diagram.

7.5 After connection, seal the terminal covers by the seal wires.

Procedure for sealing the terminal covers after all connections are made using seal wires.

Communication

8.1 This meter supports RS485, Protocol is Modbus-RTU mode;

Confirms RS485 support and Modbus-RTU protocol, listing default communication parameters like baud rate and parity.

8.2 For detailed communication list, pls contact SOCOMEC directly.

Advises users to contact SOCOMEC directly for a detailed communication list.