6 EN
DIRIS Digiware M-50 & M-70 - 548751B - SOCOMEC
2.3. Responsibility
• Assembly, connection and use must be carried out in accordance with the installation standards currently in force.
• The device must be installed in accordance with the rules given in this manual.
• Failure to observe the rules for installing this unit may compromise the device’s intrinsic protection.
• The device must be placed in a system which itself complies with the applicable standards and safety regulations
of the country of installation.
• Any cable which needs to be replaced may only be replaced with a cable having the correct rating.
• Despite constantly striving for quality in preparing this manual, errors or omissions are always a possibility and are
not the responsibility of SOCOMEC.
To Next Page
Loading...
