Why socomec ITY3-TW030B displays no battery?
If your socomec UPS displays a 'No Battery' message, it indicates that the batteries are disconnected. Check that all batteries are properly connected.
What does input bad wiring mean on socomec ITY3-TW030B UPS?
If your socomec UPS displays 'Input bad wiring,' it means the phase and neutral conductors at the input of the UPS system are reversed. Site Fault detection is disabled by default but can be enabled/disabled from the LCD settings menu. Reconnect all input wires correctly.
What to do if socomec ITY3-TW030B UPS shows output short circuit?
If your socomec UPS indicates an output short circuit, check the UPS output and the connected loads. Ensure the short circuit is removed before turning the UPS back on.
Explains safety symbols and their meanings for user guidance.
Details precautions and responsibilities to ensure user safety during UPS operation.
Covers electrical safety, environmental handling, and operational warnings for the UPS.
Highlights specific handling, installation, and maintenance safety measures for the UPS.
Step-by-step instructions for the physical installation and initial setup of the UPS.
Procedure for turning on the UPS unit when connected to the AC mains supply.
Procedure for starting the UPS directly from its internal battery.
Steps required to safely power down and turn off the UPS unit.
Lists common UPS alarms and faults, their causes, and corrective actions.
General| Product Type | UPS |
|---|---|
| Power Rating | 30 kVA |
| Frequency | 50/60 Hz |
| Form Factor | Tower |
| Battery Type | Lead-Acid |
| Weight | 800 kg |
| Topology | Online double conversion |
| Communication Interface | RS232, USB |
| Operating Temperature | 0°C to 40°C |
| Power Capacity | 30 kVA |
| Output Power | 30 kW |
To Next Page