4. When the desired level of carbonation is achieved, gently pull the carbonating bottle
towards you until it reaches its fully forward position. This will release all the
pressure in the bottle. Then unscrew the carbonating bottle to remove it from the
Sparkling Water Maker.
WARNING: DO NOT remove the bottle until you hear the sound of excess CO
2
releasing.
Enjoy your sparkling water or add your preferred SodaStream Sparkling Drink Mix
flavor to enjoy a sparkling flavored beverage!
Sparkling Drink Mix Enjoy!
FLAVOR YOUR WAY!
For sparkling drink mixes: After making sparkling water hold the open carbonating
bottle at an angle and slowly add the desired flavor by pouring it slowly and carefully
down the inside wall of the bottle. Close with the fizz-preserving cap and tighten, then
mix with a gentle shake. Enjoy!
ONLY CARBONATE WATER.
NEVER CARBONATE AFTER FLAVOR HAS BEEN ADDED.
CREATE THE BUBBLES
To Next Page
Loading...
