Need help?Do you have a question about the SODECA KIT BOXPDS and is the answer not in the manual?
Details the KIT BOXPDS pressurisation equipment.
Lists the key components and features of the BOXPDS kit.
Details the mechanical installation requirements for the equipment.
Specifies the electrical connection and supply requirements.
Outlines the initial steps for starting up the system.
Guide to viewing activated alarms and system status on the PLC.
Configuration options for fire signal logic and delay.
Setting damper travel time, smoke detection delay, and number of dampers.
Adjusting max/min pressure and related delays for the fan.
Configuration for overcurrent and low current parameters for the fan.
Setting the safety speed percentage based on pressure.
Description of the 'READY', 'FIRE ALARM', 'SMOKE IN DUCT', 'COMMON FAULT' indicator lights.
Explanation of 'RESET ALARM', 'AUTO-MAN', and 'MAN.DAMPER' selector switches.
Lists the main components included in the KIT BOXPDS.
Details the mechanical installation requirements for the equipment.
Specifies the electrical connection and supply requirements.
Outlines the initial steps for starting up the system.
Guide to viewing activated alarms and system status on the PLC.
Configuration options for fire signal logic and delay.
Setting damper travel time, smoke detection delay, and number of dampers.
Adjusting max/min pressure and related delays for the fan.
Configuration for overcurrent and low current parameters for the fan.
Setting the safety speed percentage based on pressure.
Details the indicators and controls on the external panel.
To Next Page
General
