PRODUCT FEATURES
22 HYD 5K...20KTL-3PH
3.5.5 System with multiple inverters (5–200 kW)
Up to 10 inverters can be connected in parallel, to the grid and EPS
connections, resulting in an EPS output of up to 200 kVA.
• The inverters connected in parallel should have the same
power and battery configuration.
• The energy meter or CTs are connected to the Master
inverter. Control of all inverters takes place via the link
cable.
• For the parallel switching of several devices, it is
recommended to use a joint AC load break switch for the
connected loads at the LOAD connection.
• For the parallel switching of several devices, it is
recommended to use a joint AC load break switch for the
connected loads at the GRID connection.