PRODUCT FEATURES
HYD 5K...20KTL-3PH 23
• In order to evenly distribute the loads among the inverters,
the cable length between each output and the load must
be the same.
• If the maximum apparent power of a load is greater than
110% of the inverter' s rated output, the device must not
be connected via the AC LOAD terminal, but rather
directly to the grid.
3.5.6 AC retrofit system
In this system configuration, the hybrid system for an already existing
PV system is supplemented with a solar inverter of any brand. By
installing a second smart meter, the PV production can be taken into
account and used for charging the battery.
• The communication address of meter 1 should be set to 1.
Similarly, the communication address of meter 2 should
be set to 2.
To Next Page
Loading...
