Operating IF30 for a long time in high powered modes will quickly heat up the
flashlight. This is normal.
Pay close attention to the proper installation of the battery. Always check that the
positive end of the battery faces the flashlight’s head.
Avoid hitting or dropping the flashlight.
Troubleshooting and Maintenance
Disassembling the sealed head can damage the flashlight and voids the warranty.
Sofirn, Ltd. recommends using high-quality brand batteries. Damage by battery
leakage voids the warranty.
Remove the battery if the flashlight will not be used for an extended period of
time.
To prevent self-discharge or accidental activation during storage or transportation,
unscrew the light body by half a turn or remove the battery.
Every 6 months threads should be wiped with a clean cloth followed by a thin
layer of silicone grease.
To maintain a proper level of waterproofness, replace worn-out o-rings with an
approved spare.
If the above methods do not work please refer to the warranty policy before
contacting your authorized distributor.
Sofirn Limited:
Web: www.sofirnlight.com
E-mail: us@sofirnlight.com sofirnlight@gmail.com
Please contact us if you have any questions.
If your product is defective please contact us for replacement within warranty
period.
Manufacturer: Shenzhenshi Jinba Technology Co.,Ltd
Address: 1/F to 9/F, 1st Building, NO.110 Tenglong Industrial Center, Guanlan Street,
Longhua New District, Shenzhen 518000, China
To Previous Page
Loading...
