Pro Tools|HD Version (TDM/VENUE)
In Pro Tools|HD, it is possible to use FET Compressor on either a Core or an Accel
processor, although only 44.1 and 48 kHz sample rates are supported on Core. For more
info on CPU consumption and availability, see the table below.
All sample rates are available in the RTAS and VENUE versions.
System Requirements
• Pro Tools|HD with Pro Tools 7.0 or higher or VENUE system.
• System must meet requirements for Pro Tools|HD from Digidesign
PT|HD CPU consumption Core Accel
44.1/48 kHz < 77% < 35%
88.2/96 kHz
―
< 58%
176.4/192 kHz
―
< 91%
26
To Next Page
Loading...